More specifically, it's called the OSS, output speed sensor, and it's usually located on the side of the trans if it's an auto. There's also a TSS, turbine speed sensor, but that affects shifting not the speedo. If the TSS were the problem then your engine light would be on and it would most likely be shifting hard, keeping you out of certain
From Mk1 to Mk4, the evolution of Ford Focus, which spans over 20 years (broken into four generations), has offered excellent quality, a fantastic interior, and beautiful looks. Yet, amidst every other aspect that makes it outstanding, the latest Ford Focus, Mk4, boasts Electric Power-Assisted Steering (EPAS).
My ford focus MK1 02 year failed MOT on emissions, what do you think is the reason why? The results are: Fast idle test CO% = 0.79 : limit = 0.2 fail HC ppm = 154 : limit = 200 fail Lambda = 1.036 limit = 1.030 fail Natural Idle test Limit CO % = 0.3 fail On the Emissions test result sheet it sates 2005MY Ford focus Engine type 16V.
The alternative is a faulty ABS Control Module. Since the only codes you appear to have relate to the rear ABS sensors, I'd suspect either the parking brake lever is pulled up, there is a problem with the brake fluid level sensor or the brake fluid level actually is low. The traction control light is on as a result of the ABS fault codes.
Leaks can occur anywhere in the system, but bad O-rings are the most common cause. Any time you have the system discharged, you should consider replacing the O-rings whether the leaks come from those connections or not. All Ford AC systems use a quick-connect snap ring system. To release the snap ring, you'll need any one of several special tools.
The bush (febi 32418) has applications for several other Ford, Mazda and Volvo models. Rear suspension. The highly acclaimed control-blade trailing arm multi-link suspension system was developed for the Focus model; its compact design allows maximum use of space for luggage capacity and gives excellent handling.
u8k9G. 690 201 951 457 448 891 303 614
ford focus mk1 common problems