YOUCAN ALSO RESET THE OIL CHANGE LIGHT BY THE FOLLOWING THE PROCEDURE BELOW. STEP 1. Close all doors, gear to the park position. STEP 2. Turn the ignition On. GMC ACADIA 2007-2010 OIL CHANGE REMINDER RESET; 2002-2011 Chevrolet Aveo Oil Change Reminder Reset; HOW TO RESET: CHEVROLET
Foundthe solution to an oil leak on the front of the engine that was not the head gasket, but the oil cooler! Watch the video for more details on seals and
ChevroletAveo Engine Fault. There are hundreds of reasons why the check engine warning fault light comes on, and only your dealer or mechanic is qualified to address this. Common reasons include a loose fuel cap, excess vibration, a blocked cylinder, a bad fuel mix, excessive heat and half power. This may also highlight an issue with your
Holdthe Reset Button and Turn the Key. Press and hold the reset button. Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
TheP0700 code indicates that the transmission control module (TCM) detected a problem with the transmission parameters. It communicates with the engine control module (ECM) to set the Malfunction Indicator Lamp (MIL) when the fault is detected. P0700 is not a specific code.
TheCHANGE OIL (or CHANGE ENGINE OIL) message is displayed when its time to change engine oil, usually between 3000 and 7500 miles since last oil change. To reset the oil life monitor, turn the ignition switch to RUN position, with engine off. Press the TRIP/OIL RESET button on the instrument panel for 12 seconds. The OIL CHANGE light will
vbLG. 524 576 903 406 931 877 581 704
2011 chevy aveo oil light reset
